Junction Boxes

Explosion proof junction boxes are used where hazardous material are handled or stored. These enclosures may be used to house control stations, starters, breakers, relays, meters, terminals for splicing wires, pull box, bus box or custom panels.

Control Centers

Explosion proof control stations are used where hazardous materials are handled or stored. Grouping pushbuttons, switches, pilot devices, and glass lenses in one enclosure will satisfy a wide range of control applications. This is most beneficial when having areas with minimum space or needing to centralize all controls into one space. 

Control Operators

Explosion-proof control operators are designed to be used to control circuits in hazardous locations areas. Grouping pushbuttons, switches, pilot devices and glass lenses in one enclosure will satisfy a wide range of control applications. This is most beneficial when having areas with minimum space or needing to centralize all controls in one area.

Circuit Breakers & Disconnect Switches

Explosion proof circuit breaker/disconnect enclosures are used where hazardous material are handled or stored. These units are used for overload, short circuit, and disconnect means of lighting and power circuits.

Motor Starters

Combination and Non-Combination motor starters are used in areas where hazardous material are handled or stored. These units provide disconnect means, under-voltage protection, circuit protection, and motor running protection.

Panelboards

Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions.

Instrument & Meter Enclosures

Explosion proof Instrument & Meter enclosures are used to pull or splice wires and/or to mount and enclose electrical devices in hazardous locations.

Ground Indicators and Pulling Elbows

Grounding indicators are used to logically indicate the presence of grounding for tank cars or tank trucks before and during transfer of combustible materials.

Big-Bend™ Pulling Elbows are installed in conduit systems to provide 90° bends in conduit runs, pull outlets for conductors, access to conductors for maintenance and openings for making splices.

Switchracks

Curlee switchracks provide complete motor control assemblies in one integrated package. Choose the necessary Curlee components to fit the rating, electrical switching and controlling requirements.