|
PDF files require Acrobat Reader
to view them.
| |
Motor Starters
These units provide disconnecting means, circuit and motor running protection.
Applications
Combination and Non-Combination motor starters are
used in areas where hazardous materials are handled
or stored. These units provide disconnecting means,
circuit protection, and motor running protection.
Features
- 65,000 AIC. Highest interrupt rated enclosure in the industry.
- Copper-free cast aluminum.
- Precision machined flame path between box and cover.
- Bolt on slotted mounting feet.
- Stainless steel block hinges.
- Stainless steel, captive Quad-Lead cover bolts (disengaged in 1½” turns).
- External stainless steel breaker operating handle.
- Breaker and operator shafts are stainless steel.
- Ground lug package and installation instructions for termination of ground wire enclosed.
|
 |
- Four point control terminal block, NEMA 1B with wire markers.
- Breaker operators can be locked in the “On” or “Off” position (combination starters only).
- Four plugged ¾” NPSM outlets drilled and tapped for control devices.
- Standard outlets top and bottom.
- Plugged ½” outlets top and bottom for breather/drain.
- Components are mounted on a galvanized steel removable pan.
- Enclosures are designed to accept Cutler-Hammer1, or Square D2 motor starters/circuit breakers. For other manufacturers, consult factory.
- O-ring Gasket insures watertight integrity.
Standard Materials
- Bodies and covers: copper-free aluminum.
- Cover bolts: stainless steel.
- O-Ring: Neoprene
- Hinges: Stainless Steel
Finishes
- Corrosion resistant grey epoxy powder coat inside and outside.
Compliances
- Class I, Div. 1 & 2 Groups B, C & D
- Class II, Div. 1 & 2 Groups E, F & G
- Class III NEMA 4, 4X, 7BCD & 9EFG
|
UL Listed
Standard 1604 and 1203 |
CSA Certified
Standard C22.2, No. 30 |
|
